A BEC regulates the voltage of your battery down to a manageable voltage that a servo can handle. I run 11.1v 3s lipos and I program my BEC’s to 7.4v or 6v for the servos. Here is how I wire my BEC's. I run Hitec steering servos @ 7.4v and I don't think running 7.4v through the receiver like some folks is good idea, I am just paranoid.
>>>CLICK TO ENLARGE<<<
RPPHobby.com sells for $22
http://www.rpphobby.com/product_p/cse095-0022-00.htm
Here is a some information from Castle Creations about their BEC.
>>>CLICK HERE<<<
Here is another way you can run a BEC, but it goes through your reciever.
>>>CLICK TO ENLARGE<<<
RPPHobby.com sells for $22
http://www.rpphobby.com/product_p/cse095-0022-00.htm
Here is a some information from Castle Creations about their BEC.
>>>CLICK HERE<<<
Here is another way you can run a BEC, but it goes through your reciever.
No comments:
Post a Comment